JA-100KR Control panel with built-in LAN communicator and radio module

Belongs to the core devices of the JABLOTRON 100+ security system. This is the smallest control panel for the protection of apartments, family houses and small businesses. It has an integrated LAN communicator and it is fitted with JA-111R module.

The required settings and sizing of the system are programmed through the F-Link software.

The JA-100K control panel offers:

  • up to 32 wireless or bus devices
  • up to 32 user codes
  • up to 4 sections
  • up to 4 programmable PG outputs
  • 10 mutually independent schedules
  • SMS and voice reports (with JA-190Y GSM communicator module) from the system to up to 8 users
  • 5 ARCs can be set
  • 5 selectable protocols for an ARC

The control panel has an integrated LAN communicator that enables data communication with an ARC and the JABLOTRON CLOUD, which enables full use of the MyJABLOTRON application.

The control panel contains:

  • 1 terminal board for bus connection

The control panel can only be installed by a trained installer with a valid Jablotron certificate.

Technical Specifications

Additional information

Type Of Installation

Fixed installation

Nominal control panel voltage / frequency / fuse

~ 230 V/50 Hz, T200 mA fuse 250 V, 5 x 20 mm
~ 115 V/60 Hz, T400 mA fuse 250 V, 5 x 20 mm

Operational AC voltage range

~ 195 V ÷ 250 V
~ 110 V ÷ 120 V

Electric power/current

max. 23 VA/0.1 A

Protection class


Back-up battery

12 V; 2.6 Ah max. (lead-acid)

Low battery voltage (fault indication)

≤11 V

Maximum battery charging time

48 ÷ 72 hrs

BUS voltage/max. voltage ripple (red-black)

12.0 ÷ 13.8 VDC/± 100 mV

Max. continuous consumption from the control panel BUS +RJ

400 mA permanently (1000 mA for 5 minutes)

12 hours backup (2.6 Ah)

LAN OFF: 125 mA – consumption of modules JA-190X (Y)
LAN ON: 85 mA – consumption of modules JA-190X (Y)

Max. number of sections


Max. number of devices


Max. number of users


Max. number of PG outputs


Alarm connection

Jablotron BUS – dedicated wiring
Wireless connection (with JA-111R) – unspecified wireless connection, Jablotron wireless protocol

Alarm system classification

Security grade 2/environmental class II

@ according to standards

EN 50131-1, EN 50131-3, EN 50131-6, EN 50131-5-3, EN50131-10, EN 50136-1, EN 50136-2

@ environment

indoor general

@ operational temperature/humidity

-10 °C to +40 °C, relative humidity 75% no condensation

@ power

Type A – primary supply with a charged backup battery

@ event history

approx. 7 million latest events, incl. date and time

@ system reaction to communication loss

Fault or tamper – according to the pre-set profile
@ BUS until 10 sec
@ wireless communication in 2 hrs (report)
@ wireless communication in 20 min, blocks system to be set

@ reaction to invalid code entry

After 10 wrong code entries a tamper alarm is triggered and according to the selected profile it blocks all control devices for 10 min

@ ATS classification

Supported ATS classes: SP2 – SP 5, DP2 – DP3
SPT: type Z
Operation type: Pass-Througth
Built-in LAN: SP2 – SP5 (with IP protocol)
JA-190Y SP2 – SP5 (with IP protocol)
JA-190X SP2 (with Contact ID protocol)
LAN + JA-190Y DP2 – DP3 (with IP protocol)
LAN + JA-190X DP2 (with IP / CID protocol)

@ ATS transmission protocols


@ ATC protection against substitution and data protection

Jablotron protocol: Proprietary AES encryption with minimum 128 bit key
ANSI SIA DC-09.2012 protocol with 128 bit AES encryption

LAN communicator

Ethernet interface CAT 5 (RJ-45)


268 x 225 x 83 mm


1450 g

Basic parameters of the JA-111R module

868.1 MHz, <25 mW, GFSK < 80 kHz

Radio emissions

ETSI EN 300 220-2 (R module)


EN 50130-4, EN 55022, ETSI EN 301 489-7, ETSI EN 301 489-3

Electric safety

EN 60950-1

Operational conditions

ERC REC 70-03, ERC DEC (98) 20

Certification body