JA100-BUS 111H

JA-111H TRB Bus module interface for wire detector

The JA-111H TRB module is designed for the connection of any wired detector (with contact or impulse outputs) to the JABLOTRON 100+ system and provides it with a power supply.

This built-in module can be directly integrated into the detector.

  • One input of the module has a fixed Tamper signal, the second input reports an alarm signal and the third input is used to report a fault of a connected device or to report a special “Masking” signal (for detectors with an Anti-masking function).
  • The module can also be used for the connection of a CT-01 roller blind detector.
  • The module can be used to control programmable PG outputs.
  • It supports setting of a minimum activation time for alarm triggering (0.1 s – 300 s).
  • The detector features status as well as impulse activation.
  • The module is a device of the JABLOTRON 100+ system, is addressable and occupies one position in the system.

Technical Specifications

Additional information


from control panel BUS 12 V DC (9…15 V)

Current consumption - Nominal consumption - to calculate backup

8 mA
all inputs connected to GND
(+ consumption of connected devices)

Current consumption - Maximal consumption - for cable selection

12 mA
(+ consumption of connected devices)

Maximum allowed current of the connected detector

50 mA


16 x 30 x 12 mm


8 g


Security grade 2/environmental class II
Note: valid only, if it is built-in to security grade 2 or higher certified housing

- According To

EN 50131-1, EN 50131-3 (ACE type B)


Indoor general

Operating Temperature Range

-10 to +40 °C

Average Humidity

75 % RH non condensing

Certification Body

Trezor Test s.r.o. (no. 3025)

Valid For Installation Of The Module Into A Product Certified For

security grade 2/environmental class II and also if the connection to the module is compatible.

Also Complies With

EN 50130-4, EN 55022