JA-111R Bus interface for JA-100 wireless devices

The JA-111R radio bus module is used to connect all wireless devices of the JABLOTRON 100+ system. To perfectly cover the supervised premises, up to 3 JA-111R modules can be installed in a system. Distributed without plastic cover PLV-JA111R.

The electronic unit is installed in the front part of the cover and it is fitted with a slide-in terminal board, which enables convenient connection of cables. In the rear part, there are break-off holes for cables.

The module communicates with the bus of the control panel and is powered by it. The module is designed for installation outside the control panel and it is used as the second or third one in the system. If you need to have a radio module in the control panel, we recommend you to buy a control panel with a radio module – the JA-10xKR-xx unit.

Technical Specifications

Additional information

Compatible With

F-Link 1.4.0 or higher


from control panel BUS 12 V DC (9 … 15 V)

Current Consumption In Standby Mode

35 mA

Current Consumption For Cable Selection

80 mA

Communication Band

868.1 MHz, JABLOTRON protocol

Maximum Radio-Frequency Power

25 mW

RF Range

300 m


43 x 160 x 23 mm


70 g


Security grade 2 / Environmental class II / ACE type B
(According to EN 50131-1)

Operational Environment

Indoor general

Operational Temperature

-10 °C to +40 °C

Average Operational Humidity

75 % RH, non-condensing

Certification Body

Trezor Test s.r.o. (no. 3025), Telefication B.V.

Complies With

EN 50131-1 ed. 2+A1+A2, EN 50131-3, EN 50131-5-3+A1, ETSI EN 300 220-1-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581, T 031

Can Be Operated According To

ERC REC 70-30