JA100-BUS 110M
JA-110M Bus module for magnetic detectors – 2 inputs
The JA-110M bus module is used to connect wired magnetic door/window detectors to the bus and contains two independent inputs programmable to be NC/NO or using a balancing resistor.
Allows you to set a minimum time for alarm activation (0.5 s, 1 s, 2 s or 5 s).
The detector communicates with and is powered by the control panel bus. The detector is addressable and occupies two positions in the system.
SMART MEMORY indictaion (SMI) provides a visual (LED) verification of detector triggering. SMI is reset via the keypad.
Technical Specifications
Additional information
| Power | from control panel bus 12 V (9…15 V) |
|---|---|
| Current Consumption In Standby Mode | 5 mA |
| Current Consumption For Cable Selection | 5 mA |
| Maximum Length Of The Connection Cable Between The Input And Detector | 3 m |
| Dimensions | 100 x 40 x 24 mm |
| Classification | Grade II |
| - According To | EN 50131-1, EN 50131-3 |
| Operational Environment According To EN-50131-1 | II. Indoor general |
| Operating Temperature Range | -10 °C to +40 °C |
| Also Complies With | EN 50130-4, EN 55022 |
