JA100-BUS 111H-AD
JA-111H-AD TRB Bus module for system control
The JA-111H-AD TRB is designed for the connection of any control device (with contact or impulse outputs) to the JABLOTRON 100+ system and provides it with a power supply from the control panel bus.
This built-in module can be directly integrated into the control device.
One input of the module has a fixed Tamper signal, several set signals can be selected for the second input and the third input serves either to report a fault of the connected device, or it can be used as the second control conductor with a fixed “Unset” signal.
- The module can be used to control programmable PG outputs.
- It allows you to set a minimum activation time for the controller (0.1 s – 300 s).
- The detector features impulse activation for dual-conductor control as well as status control for single-conductor control.
- The module is a component of the JABLOTRON 100+ system, is addressable and occupies one position in the system.
Technical Specifications
Additional information
| Power | from control panel BUS 12 V DC (9 … 15 V) |
|---|---|
| Current consumption - Nominal consumption - to calculate backup | 8 mA |
| Current consumption - Maximal consumption - for cable selection | 12 mA |
| Maximum allowed current of the connected detector | 50 mA |
| Dimensions | 16 x 30 x 12 mm |
| Weight | 8 g |
| Classification | Security grade 2 / environmental class II |
| - According To | EN 50131-1, EN 50131-3 (ACE type B) |
| Environmental | Indoor general |
| Operating Temperature Range | -10 °C to +40 °C |
| Average Humidity | 75 % RH non condensing |
| Also Complies With | EN 50130-4, EN 55022 |
