JA100-WL 180W
JA-180W Wireless PIR and MW combined detector
The detector is used for human motion detection in the interior of a building.
Thanks to the combination of motion and microwave detection, the detector is highly resistant to false alarms.
When motion is sensed by the PIR detector, the MW detector is activated to confirm the triggering of the PIR. Only after receiving a confirmed alarm signal from the MW unit , the detector sends an alarm report to the control panel.
The detection characteristic may be optimised by using alternative lenses JS-7904 LONG HALLWAY, JS 7906 PET or JS-7901 CURTAIN.
It is addressable and occupies one position in the alarm.
Technical Specifications
Additional information
| Power Supply | Lithium battery type CR14500 (AA) 3.6 V/2.45 Ah |
|---|---|
| Nominal current | 21 μA |
| Maximal current | 38 μA |
| Battery low voltage | ≤ 2.6 V |
| Typical battery lifetime | approx. 2 years (DIP no. 3 to NORM) |
| Communication band | 868.1 MHz, Jablotron protocol |
| Communication range | approx. 300 m (open area) |
| Recommended installation height | 2.0 to 2.5 m above floor level |
| PIR detection angle/detection range | 110°/12 m (with basic lens) |
| MW detection angle/detection range | 90°/15 m (sample room) |
| MW detection range/frequency | 9.35 GHz |
| Dimensions | 110 x 60 x 51 mm |
| Weight | 114 g |
| Classification | Security grade 2/Environmental class II |
| - according to | EN 50131-1, EN 50131-2-4, EN 50131-5-3 |
| - operational environment | Iindoor general |
| - operational temperature range | -10 °C to +40 °C |
| - average humidity | 75 % RH non condensing |
| - certification body | Trezor Test s,r.o. (no. 3025) |
| Complies with | ETSI EN 300 220, ETSI EN 300 440, EN 50130-4, EN 55022, EN 60950-1 |
| Can be operated according to | ERC REC 70-03 |
